DIN-Rail Three Phase Meters supplied by METEC |
|
DZG DVH3113 DIN-Rail 65A Class 2.0 |
 Model DVH3113 |
Wherever energy costs have to be established and accounted for at each point of consumption or connection. |
|
Features |
|
• For mounting on DIN rail (DIN-EN 50022) • For 3-wire and four-wire connection • LCD display • For direct connection • Polyphase electronic whole-current kWh meter • Rated 230/400 volts, 5-65 amps 50 Hz • Manufactured to IEC 62053-21 Class 2.0 requirements • Large six digit LCD single-rate registers • DIN-rail mounting • Three supply voltage indicators • Energy flow direction indicator • Fully isolated pulse output at 500 imp/kWh • Short terminal covers • Terminal bore hole size for up to 25mm² cable • External dimensions (L x W x D) 96 mm x 126 mm x 66 mm • EGR Compliant |
|
Application |
|
• In domestic metering • On building sites • Exhibitions • Shopping centres • Camping grounds • Workshops • Training centres • Hospitals etc. |
|
DZG MDVH3106 DIN-Rail -/5A CT Connected Class 1.0 |
 Model MDVH3106 |
Wherever energy costs have to be established and accounted for at each point of consumption or connection. |
|
Features |
|
• Manufactured to IEC 62053-21 • For DIN rail mounting • For 3-wire and four-wire connection • Multi-function LCD display • For transformer connection (-/5A) • Transformer ratio can be set from a fixed list • Large six digit LCD single-rate register • DIN-rail mounting • Three supply voltage indicators • Energy flow direction indicator • Short terminal covers • Terminal bore hole size for up to 10mm² cable • External dimensions (L x W x D) 96 mm x 126 mm x 66 mm • EGR Compliant |
|
Application |
|
• In domestic metering • On building sites • Exhibitions • Shopping centres • Camping grounds • Workshops • Training centres • Hospitals etc. |
|